Flange Soft Seal Gate Valve For Industrial Applications

Flange Soft Seal Gate Valve for Industrial Applications The flanged concealed stem soft-sealed gate valve is a valve widely used in industrial fluid pipeline systems, mainly used to cut off and regulate the flow of media. Its main features are as follows: The flanged concealed stem soft-sealed gate valve is usually made of ductile iron or stainless steel, with high strength and corrosion resistance. The inner and outer surfaces of the valve body are often coated with non-toxic epoxy resin to prevent corrosion and rust. The design of the flanged concealed stem soft-sealed gate valve complies with a number of international and national standards, which ensure the reliability and safety of the valve in different environments. The opening and closing parts of the soft-sealed gate valve are gate plates, the movement direction of which is perpendicular to the direction of the fluid, and can only be fully opened and fully closed, and cannot be used to adjust the flow. When external force acts on the valve stem, the valve stem nut installed on the gate plate and the guide groove on the valve body work together to lift the gate plate, thereby realizing the opening and closing of the valve. The soft-sealed gate valve uses the compensation effect of the micro-deformation of the elastic gate plate to achieve a good sealing effect, overcoming the poor sealing, water leakage and rust of general gate valves. This design enables the valve to maintain good sealing performance in long-term use.