The function of drywall nails is very important. There are examples of poor quality nails in building walls and collapsed houses in the world. There have
also been many serious accidents caused by poor quality of drywall nails. Dry wall nails, also known as wall studs, are used for installing various
gypsum boards, ceilings, light partitions, light steel keels, etc. The characteristic of appearance is the shape of the horn head. Dry wall nails in carbon
steel need to go through a series of processes to become the final dry wall nails. In the dry wall nail process, annealing, drawing, stamping, picking up,
and heat treatment are all strictly controlled. Only after passing the process will the factory fall into the hands of customers. Moreover, the amount of
drywall nails is sufficient.
There are many types of drywall nails
For example, pin screws, wall panel drywall nails, self drilling drywall nails, half hair, hexagonal head drywall nails, etc. Each drywall nail has a different
purpose. What are the specific purposes of drywall nails?
1, Pin fastening screws
Mainly used for connecting thin metal plates. Threads are ordinary threads with circular arc triangles, and the surface of the thread also has a very high
hardness. Therefore, when connecting, screws can be threaded from the holes at the bottom of the connector thread to form a connection.
The characteristics of this type of screw are low torque and high locking performance, providing better working performance than ordinary dry-type wall
screws and replacing mechanical screws.
2, Wall panel dry wall nail
Used for connecting gypsum wall panels and metal keels. The thread is a double headed thread with a high hardness (HRC53) on the surface, which
can be quickly screwed into the keel to form a connection without the need for prefabricated holes.
3, Self drilling drywall nail
Unlike regular drywall nails, regular drywall nails undergo two processes during connection: drilling (at the bottom of the drill thread) and tapping
(including fastening connections). If the self drilling dry wall nail is connected, the drilling and tapping processes can be combined and completed in
one go. Firstly, drill a hole with the drill bit in front of the screw, and then use screws to tap (including fastening connections), saving construction time
and improving construction efficiency.
4, Pan head and hexagonal head dry wall nails
It is applicable to the situation where the drill bit is allowed to be exposed. The hexagonal head drywall nail can follow the torque greater than that of
the coffee dried tofu nail.
Needle and inner hexagonal flower shaped drywall nails are suitable for situations where the nail is not exposed, and inner hexagonal flower shaped
drywall nails can withstand greater torque than calm head drywall nails.
Half calm hair with dry wall nails is suitable for situations where the nails are slightly exposed. When disassembling the assembly of drywall nails,
slotted drywall nails require cross shaped screws, cross shaped drywall nails require cross shaped screws, hexagonal drywall nails require hexagonal
wrenches, and hexagonal head drywall nails require blank wrenches, ring wrenches, socket wrenches, or adjustable wrenches.
