The flower basket bolt uses a screw to expand and contract, which can adjust the tension of the steel wire rope. Components can be bundled during
transportation and loosened during installation and calibration.
It consists of an adjusting rod with left and right threads, a nut, and a pull rod. The adjusting rod is also fixed with an anti-theft and anti loosening device
composed of a cover plate, a fixing plate, and a guide plate connected by anti-theft and anti loosening bolts. When using, a dedicated matching sleeve
must be used to unscrew the anti-theft and anti loosening bolt, which has good anti-theft effect and is safe and reliable. After disassembling the anti-
theft and anti loosening device, there is no need to remove it. Use the ring guide plate on it to slide along the pull rod and adjust and operate it by
moving a distance, making it easy to use. It has a simple structure, easy processing, low cost, and strong practicality. Especially suitable for power
lines, especially as a positioning device for high-voltage iron tower tie rods.
Various specifications of ordinary or high-strength flower orchid bolts, flower basket bolts, split flower orchids, split flower baskets, made of Q235B, 45
steel, 40Cr, 35CrMoA, Q345D flower orchid bolts, flower basket bolts, split flower orchids, split flower baskets, etc. What is the specification table for
flower basket bolts? The main function of flower basket bolts is to adjust the tension of the steel wire rope, which is widely used. Therefore, the
specification table of flower basket bolts is also a commonly used data.
The classification of flower basket bolts generally includes the first pull rod, flower basket bolt component, second pull rod, and positioning piece. The
flower basket bolt component includes the first guide plate, the second guide plate, the first connecting piece, and the second connecting piece.
The flower basket is a cast steel component, and when designing and calculating, only the corresponding pull rod should be calculated, but the
specifications of the flower basket should be one level higher than the pull rod.
