Decorative Latches For Cabinets

Structural composition
Decorative Latches For Cabinets typically consist of a main body and a compressible section. The main body is cylindrical with an opening diameter of 12mm and a depth of 38mm. The opening diameter of the embedded spring bracket is 6mm and the depth is 9mm. These dimensions ensure that the Decorative Latches For Cabinets can provide sufficient tension and load-bearing capacity during installation, reaching 20kg and 40kg respectively.

usage method
When installing Decorative Latches For Cabinets, special attention should be paid to the following points:
Directionality: When installing the main pole, pay attention to the small round mouth facing upwards. If it is crooked, you can use a small screwdriver to insert and rotate it for adjustment.
Tool selection: When installing the compressible partition pin, it cannot be directly tapped in, otherwise it will affect the tension and may also damage the product. Therefore, it is recommended to use an electric drill for installation.

Application Fields
Decorative Latches For Cabinets are widely used not only in furniture and storage cabinets, but also in shoe midsoles, luggage and handbags, automotive insulation panels, mechanical pads, and other fields. This indicates that the pivot in the spring, as a universal hardware accessory, has important applications in multiple industries.